Standard reference
ASME B16.47 Series B Flanges
Series B is a separate large-diameter flange series within ASME B16.47. Confirm its complete interface before ordering replacements or mating equipment.
A distinct dimensional series
Series B should be identified on the purchase description and mating-component drawing. Do not select it solely because it may differ in mass or overall dimensions from another series. The flange, gasket and bolting must form a compatible specified joint.
Replacement and legacy documentation
Older project documentation may reference historical API 605 practice. Verify the actual dimensions and the governing contract requirements before associating an old reference with a current B16.47 Series B enquiry. API 6A describes a different equipment domain and is not an alternative designation.
Complete the design basis
State the flange type, size, class, material, bore and facing under the required edition. Confirm pressure-temperature suitability separately from dimensional matching. Include weld preparation and inspection details for a replacement or equipment connection.
Selection reference only. Offered scope, technical compliance and availability are confirmed against the complete project enquiry.
Standard scope and ordering designation
Use ASME B16.47 Series B only within its applicable scope. Obtain numerical dimensions and rating tables from the governing standard and the approved project documentation.
| Parameter / designation | Technical information | Selection requirement |
|---|---|---|
| Standard and edition | ASME B16.47 Series B | Record the exact edition and applicable type/series in the purchase description. |
| Scope | Series B is a separate large-diameter flange series within ASME B16.47. Confirm its complete interface before ordering replacements or mating equipment. | Check size, material and component scope before applying any table. |
| Dimensional designation | Nominal size, series/type, rating designation and dimensional units. | Matching nominal size does not prove matching bolt circle, thickness or facing. |
| Material-dependent rating | Material group, design temperature and any standard-specific rating rules. | Do not read a class number as a direct pressure limit or transfer ratings between materials. |
| Related requirements | Gaskets, fasteners, attachment welds and the project piping/equipment code. | The flange standard does not replace complete assembly design or installation requirements. |
| Legacy or alternate designations | Existing drawing number, original standard and proposed replacement designation. | Verify dimensions and suitability rather than assuming historical names are equivalent. |
Compare related options
Compare ASME B16.47 Series B Flanges with the related forms or references below. A related product is not necessarily a permissible substitute.
| Related product / reference | Distinction | Check before selection |
|---|---|---|
| ASME B16.47 Series A Flanges | Specify Series A explicitly when ordering a large-diameter flange to ASME B16.47. A matching nominal size does not make a Series B flange interchangeable. | ASME B16.47 edition with Series A stated |
| ASME B16.47 Flanges | ASME B16.47 covers large-diameter steel flange requirements within its defined scope. Every enquiry must distinguish Series A from Series B. | Explicit Series A or Series B designation |
| API 6A Flanges | API 6A flange connections belong to wellhead and tree equipment requirements. They are not general pipe flanges or a modern name for historical API 605 flanges. | Equipment drawing, exact type, size and pressure designation |
Inspection, documents and delivery
Define acceptance requirements for ASME B16.47 Series B Flanges in the purchase order. Required examinations and documents depend on the material, design and project specification.
| Review stage | Information to confirm | Order requirement |
|---|---|---|
| Material identity and traceability | Specification, grade, heat/lot identification and the required material certificate. | Agree documentation and marking before manufacture; visual appearance cannot verify alloy identity. |
| Dimensional verification | Critical dimensions from the selected standard or controlled drawing. | Identify inspection points, tolerances, units and drawing revision. |
| Surface and end condition | Gasket-contact surface, attachment end, edges and any coating exclusions. | State finish and visual acceptance criteria; agree protection of machined surfaces. |
| Supplementary examinations | Any specified PMI, NDE, hardness, impact, corrosion or other tests. | Define the method, sampling and acceptance criteria; tests are not automatically included. |
| Assembly compatibility | Adjoining components, weld or mechanical interface and project service conditions. | Design approval and correct assembly remain separate from a dimensional inspection report. |
| Packing and order release | Quantity, identification, surface protection, documents and delivery destination. | Agree preservation, packaging and release requirements with the order. |
Enquiry checklist
Details for ASME B16.47 Series B
Specify the complete joint and design conditions. This checklist is not a dimensional table or an engineering approval.
| Item | Requirement |
|---|---|
| Reference | ASME B16.47 edition and Series B |
| Legacy records | Original drawing or historical designation when replacing a flange |
| Joint | Facing, gasket, bolt pattern and bore |
| Design | Material grade and pressure-temperature conditions |
Continue the specification